Contact us
Add.:Kaifa 2nd road Economic
Development Zone,Ruian city,
Zhe jiang province,China.
Tel.: +86-577-65153268
Mob: +86-13967740968
Mob: +86-13626587782
Fax: +86-577-65153268
E-mail:
eon.machinery@gmail.com
HOME >Company News--The security of Hot Melt adhesive Coating Machine service

The security of Hot Melt adhesive Coating Machine service


Origin:Xuteng company
Time:2013-10-10 16:57:09

The security of Hot Melt adhesive Coating Machine service

Basically our hot melt adhesive coating machine is dividually packaged, we will send one engineer to the customer¡¯s factory and installed the machine. So our engineer will teach the workers how to install and maintain the hot melt adhesive coating machine face to face for free. But it is the best the workers can maintenance and repair the hot melt adhesive coating machine. So we will introduce the security of hot melt adhesive coating machine¡¯s service.
1.                  Before maintaining hot melt adhesive coating machine, the workers firstly must cut off all of the powder on the hot melt adhesive coating machine.
2.                  When operating the maintenance work, workers don't wear earrings, watches, necklaces, bracelets and so on can be conductive adornment, prevent accidents.
3.                  Don't remove the check to adjust any parts of the hot melt adhesive coating machine unless you have enough knowledge of equipment performance.
4.                  Only qualified personnel can be in hot melt adhesive coating machine for maintenance work.
5.                  Cleaning hot melt adhesive plastic cylinder, avoid the use of fireworks or sharp hard tools, so as not to scratch plastic barrels of internal teflon adhesive coating.
6.                  when you maintain hot melt adhesive coating machine, it must wear safety gloves, goggles and long sleeve clothes, avoid the body part by high temperature liquid hot sol burn, or been seared in the high temperature of the surface of the element.
7.                  Loose or installation of the assembly, the pressure must be determined for the hot melt adhesive coating machine with pressure air supply pressure has been reduced to zero.
8.                  When the air pressure or hot melt adhesive is leaking, don¡¯t continue operate the hot melt adhesive coating machine, first making the hot melt adhesive coating machine stop, cut off power supply, and operating pressure decreases to zero again for maintenance.

 



Home| About CON | Hot Melt Coating Machine | Hot Melt Glue Sealing Machine |Hot Melt Powder Spraying Machine| Company News | Send Inquiry |Contact us
Add.: Kaifa 2nd road, Economic Development Zone, Ruian city, Zhejiang province, China. sitemap sitemap Design By: ZHONGXIN